The Height adjustable basketball stand manufacturer guides the standard placement position of the customized Height adjustable basketball stand from China manufacturer

Installation instructions of customized Height adjustable basketball stand from China manufacturer : the size of basketball court is 28 meters long and 15 meters wide. It is a solid rectangular plane without obstacles. Buffer zone shall be considered during site construction. In principle, FIBA stipulates that 2m shall be reserved in the end line area and 1m shall be reserved in the sideline.

The customized Height adjustable basketball stand from China manufacturer should not be placed against the wall indoors. It should be placed in an open place with a certain distance from the wall, so that you won't hit the wall when you lay up.

After the customized Height adjustable basketball stand frame is put into the pit and the position is determined, the pit shall be filled with concrete and shall not be used within three days. The backboard generally has 2-4 connecting rods, which are mainly used to adjust the angle of the backboard and stabilize the backboard For the special installation position of some basketball stands, such as the roof of the building or the roof of the garage, we can also use the method of embedded bolts to bury the flange plate in the pit and fill it, and then connect the embedded parts at the bottom of the basketball stand.

1. First, excavate two embedded pits of 80 (length) cm * 80 (width) cm * 80 (depth) cm with the center line extending 80 cm (CM) to the outfield at both ends of the basketball court.
2. Ask the workers to place the two basketball frames into the embedded pit according to the embedded size (the embedded line is marked on the basketball frame), then pour in the concrete, and measure the vertical level of the basketball frame body with a level ruler.
3. After measuring the verticality of the basketball stand, use square wood or moso bamboo as a support to fix the basketball stand until the concrete solidifies. (generally 4-9 days)
4, after the concrete is solidified (4-9 days), the scaffold is used to install the base note and the hoop on the basketball stand, then the perpendicularity of the backboard is adjusted.
5. If the customer uses a toughened glass basketball board, when installing the basketball board, it must ensure that the toughened glass plane is absolutely horizontal and not distorted by external force before installation, and the backboard is not explosive and broken.

Check and fix all screws and connectors, and the installation is completed.

There is a standard for the safety of customized Height adjustable basketball stand from China manufacturer. The customized Height adjustable basketball stand from China manufacturer should take the NBA standard as an example. The standard height is subject to the distance between the upper edge of the hoop and the ground. The standard height is 3.05 meters. If you take the backboard as an example, the standard is that the bottom edge of the backboard is 2.9 meters away from the ground and the top is 3.95 meters away from the ground. In other words, if you don't add a timer, the overall height of the basketball frame is 3.95 meters.