How to use portable ballet barre

1. Take out the portable ballet barre crossbar and the bracket from the carrying bag, insert the four bracket tubes into the left and right insertion holes of the crossbar respectively, and follow the looseness and tightness beside the left and right insertion holes of the crossbar. Tighten each stent tube as shown in the figure.

2. After the portable ballet barre is assembled, press the support ball on the bracket tube to adjust the four brackets to the same height according to their own requirements for the height of the bar (the scale on the bracket tube has a total of 7 scale values. The degree value represents the height of the crossbar at the current position).
3. After use, if you need to put away the portable ballet barre, please remove the four brackets, put the crossbar and the bracket into the portable bag, and put them in the corner. The portable ballet barre is made of ash wood material, seamless plating Steel pipe, electroplating treatment. The dance handle has solid round steel as the lifting rod, which is lifted and lowered with a touch ball, double buckle lock, and the surface is sprayed with polyester varnish.
The height of the base of the portable ballet barre can be properly raised and lowered between 800 and 1100. There is a 2.2cm diameter spring steel inside. The dancing bar has the characteristics of elasticity, good toughness, high hardness, and moisture resistance; the dancing bar has good shock resistance and steam bending, straight texture, beautiful pattern, and shiny. Portable ballet barre is suitable for use in dance classrooms, dance activity rooms, schools, enterprises and institutions.